Epson Alignment Paper How to Read the Paper
Problem Solver
Print Quality Issues
Horizontal banding
If you are having print quality problems, beginning perform a test impress. Then, compare your test press with the illustrations below. Click the caption under the analogy that best resembles your printout.
Horizontal banding
Endeavour 1 or more of these solutions:
- Make sure that the printable side of the newspaper is face up up in the sheet feeder.
- Run the Head Cleaning utility to clear whatever clogged ink nozzles.
- Run the Print Caput Alignment utility.
- Clear all customized settings by selecting Automatic as the Manner setting on your printer software's Main menu (Windows) or in the Impress dialog box (Macintosh).
- Check the
ink out light. If the light is flashing, supervene upon the appropriate ink cartridge. See Replacing an Empty Ink Cartridge for details.
- Brand sure that Maximum is not selected as the Printable Area setting in your printer software. When this setting is selected, banding may occur in the expanded area.
- Make certain that the Media Type selected in the printer software is appropriate for the type of media loaded in the printer.
- Brand sure the MicroWeave check box is selected when available in the Advanced dialog box. For Windows users, run across Making Advanced settings for details. For Macintosh users, see Making Advanced settings.
[Top]
Vertical misalignment or banding
Try 1 or more of these solutions:
- Make certain that the printable side of the paper is confront in the sheet feeder.
- Run the Print Caput Alignment utility.
- Clear the High Speed cheque box in the Advanced dialog box. For Windows users, run into Making Advanced settings for details. For Macintosh users, encounter Making Advanced settings.
- Run the Head Cleaning utility to articulate any clogged ink nozzles.
- Brand sure that the Media Blazon setting selected in the printer software is appropriate for the type of media loaded in the printer.
- Brand sure the MicroWeave check box is selected when available in the Avant-garde dialog box. For Windows users, meet Making Advanced settings for details. For Macintosh users, run across Making Advanced settings.
[Top]
Incorrect or missing colors
Try one or more of these solutions:
- Change the Colour setting in your printer software to Colour. For instructions, see Using the Automatic mode for Windows or Using the Automatic fashion for Macintosh.
- Adjust the color settings in your application or in your printer software's Advanced dialog box. For instructions, see Making Advanced settings for Windows or Making Avant-garde settings for Macintosh.
- Run the Head Cleaning utility. If colors are still incorrect or missing, replace the color ink cartridge. If the trouble persists, supervene upon the blackness ink cartridge. Run across Replacing an Empty Ink Cartridge.
- Practise not use ink cartridges beyond the expiration date printed on the cartridge package. Also, if the printer has non been used for a long time, replace the ink cartridges. See Replacing an Empty Ink Cartridge.
[Superlative]
Blurry or smeared printout
Try ane or more than of these solutions:
- Make sure that you are using the appropriate printer driver for your printer.
- Apply only newspaper recommended by EPSON.
- Make sure that the printer is on a apartment, stable surface that extends beyond the printer base of operations in all directions. The printer volition not operate properly if it is tilted.
- Make certain that your paper is not damaged, muddy, or also old. Also, make certain that the printable side of the paper is face up in the canvass feeder.
- Brand sure that your paper is dry and that the printable side is facing upwardly. Also, brand sure that you are using an acceptable paper type. See Newspaper for specifications.
- Clear all customized settings past selecting Automatic as the Style setting on your printer software's Main carte (Windows) or in the Print dialog box (Macintosh).
- If the paper is curled toward the printable side, flatten it or whorl it slightly toward the opposite side.
- Remove each canvas from the output tray as it is printed.
- If you are printing on glossy media, place a support sheet (or a sheet of evidently paper) beneath the stack. Or, load only one canvass at a time.
- Do not touch or permit anything to come into contact with the printed side of paper with shiny finishes. After printing, documents that are printed on glossy media should not be handled for a few hours to allow the ink to set.
- Run the Caput Cleaning utility.
- Run the Print Caput Alignment utility.
- Adapt the strength of the Color Density in the Newspaper Configuration dialog box. For Windows users, see Adjusting the paper configuration for details. For Macintosh users, meet Adjusting the paper configuration.
- Adjust the Drying Time per Print Page in the Paper Configuration dialog box. For Windows users, see Adjusting the newspaper configuration for detail. For Macintosh users, encounter Adjusting the newspaper configuration.
- Load and eject dry out paper several times. If the trouble persists, ink may accept leaked inside the printer, so wipe the inside of the printer with a soft, clean material.
[Top]
Printer rollers leave unwanted marks on your documents
If the printer rollers go out unwanted marks on your document, utilise the included cleaning pad to clean the rollers.
It may go necessary to clean the printer rollers in the following situations:
- When you apply paper that is not distributed by EPSON. In this case, information technology takes longer to dry out the ink. Set the waiting fourth dimension for drying longer or arrange the quantity of the ink. For Windows users, encounter Making Advanced settings for details. For Macintosh users, encounter Making Advanced settings for details.
- When you use EPSON special media that is non supported by this printer.
- When y'all print on the wrong side of the paper.
- When you use the printer in conditions that differ from the environment specified in the manual.
- When the printer rollers have not been cleaned recently.
Follow the steps beneath to clean the printer rollers.
 | Turn off the printer. |
 | Wet the cleaning pad with h2o and squeeze it gently to remove whatever excess water. |
 | Load a cleaning sheet, broad edge first. |
It takes about three minutes for the printer to feed the sheet through the printer. During this time, clean the printer rollers every bit described in pace 6.
 | Wipe the printer rollers with the clammy cleaning pad. Rotate the printer rollers to ensure that they are thoroughly cleaned. |
If the sheet is ejected before you cease cleaning the rollers, start the cleaning procedure over from footstep four.
 | Once the canvas is ejected, bank check it for unwanted marks caused past muddy printer rollers. |
Repeat the unabridged procedure until the sail passes through the printer without accumulating any new marks.
 | Turn the printer off. |
[Top]
Print quality does not improve later on head cleaning
If the quality of your printouts remains poor even after repeatedly cleaning and aligning the print head, ane or some of the ink cartridges may be old or damaged and should be replaced.
To replace an ink cartridge before the Status Monitor notifies you lot that the cartridge is empty , see Replacing an Ink Cartridge .
[Top]
Version one.00E, Copyright © 2001, SEIKO EPSON CORPORATION
jeffriestescomirce.blogspot.com
Source: https://files.support.epson.com/htmldocs/pho22_/pho22_rf/trble_2.htm
0 Response to "Epson Alignment Paper How to Read the Paper"
Postar um comentário